Emissions Products

All you’ll ever need! Serck Services, Inc. is proud to offer skilled sales technicians to provide tailored solutions for your needs. The Serck Services, Inc. team is committed to continuously improving our service to you.

Our people are receiving continuous training and education on the latest EPA and local state laws in efforts to provide our customers the best compliance standard serviced product. Please contact your local Serck facility for more information.

Serck Services Inc offers a complete line of Unipart Heavy Duty Diesel Particulate Filters (DPF), Diesel Oxidation Catalyst (DOC) and Emissions Gas Regeneration (EGR) Coolers. Along with these replacement parts, Serck offers state of the art cleaning and refurbish. This cleaning meets the EPA and Colorado Clean Air standards.

DPF Cleaning

10 Steps back to your door! Serck Services Inc offers the best in class, EPA Approved, emission product cleaning :

• We visually inspect for damage, oil and antifreeze contamination while at your facility.
• ​Back at our facility, we check the unit for breaches by using our Magnehelic Inspection station to set a vacuum and take readings.
• The unit is pre-cleaned by setting a vacuum and blowing compressed air to make ready for entry into our regeneration oven.
• Placing the unit into our oven and setting it to gradually heat up, baking the unit at 1112 degrees fahrenheit.
• Unit stays in our oven at 1112 degrees for 2 hours and then gradually cools down.
• Total regeneration time is 8 hours.
• We remove the unit from the oven, placing it back into our Magnehelic station for final vacuum and compressed air cleaning and take final reading.
• The unit is then brushed and cleaned externally to ensure a thorough cleaning externally.
• Complete inspection reading forms
• Delivered back to your door!

DPF Assembly

DPF Oven

DPF

DPF Blast Cabinent

DPF

DOC Cleaning

• We visually inspect the unit for damage, oil and antifreeze contaminants while at your facility.
• The unit is pre-cleaned by setting a vacuum and blowing compressed air to make ready for entry into our regeneration oven.
• Placing the unit into our oven and setting it to gradually heat up, baking the unit at 1112 degrees fahrenheit.
• Unit stays in our oven at 1112 degrees for 2 hours and then gradually cools down.
• Total regeneration time is 8 hours.
• The unit is then brushed and cleaned externally to ensure a thorough cleaning externally.
• Complete inspection reading forms
• Delivered back to your door!

New DPF, DOC, and EGR products